Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to remove the old panes and put in new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards will fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your home until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the size of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can be caused by the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and then perform a test fitting. The corners of the sash must align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and wet floors. The leaks of water from windows do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how serious the issue is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your upvc window repair window is difficult to open or if it blows open with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to offer assistance.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges may also become unbalanced due to wear, creating an opening between the frame and sash. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it's possible to just give them a good clean, but in some instances it could be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. They will help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually get worn out and it may be more cost-effective to replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.